|
Features
& Benefits |
 | |
Reliability
|
| Line-interactive |
Innovative line-interactive
design uses the DC to AC power inverter "in reverse," like a
battery charger, during normal operation providing greater
performance and efficiency. |
|
|
| Network-grade line conditioning
|
Full time EMI/RFI filters
prevent line noise from causing data errors |
|
|
| Sine-wave output |
Sine-wave output provides
assurance of compatibility with all loads. (Does not apply to
SU420NET/SU620NET models) |
| Lightning and Surge Protection
|
When measured via ANSI/IEEE
587 Category ''A" and "B" tests, the suppression performance
of the APC Smart-UPS is superior to virtually all separate
surge suppressors. |
| Auto Diagnostic Testing |
The product automatically
performs a self-test every two weeks. This ensures you will be
alerted to degraded batteries before they wear out. Through
software, or the push of a button, you may perform self-tests
anytime. |
| Unatteded Shutdown |
In the event of an extended
power outage, an APC Smart-UPS will inter-face with PowerChute
plus via the serial port to perform automatic safe shutdown of
the attached system. Power failures can occur at night, on
weekends, or while the system administrator is out of the
building, which makes automatic safe shutdown critical.
Smart-UPS provides extensive unattended safe shutdown of many
operating systems. |
| Site wiring fault indicator |
Alerts you to potential
problems, such as missing ground and reversed polarity, two
common miswirings which usually require an electrician’s visit
to diagnose (120VAC models only). |
| Alarms |
Audible alarms alert you to
changes in operating environment and battery conditions. Some
alarms are software configurable and most can also be
suppressed or delayed to eliminate nuisance alarms.
|
Availability
|
| AVR Boost |
Automatically corrects
brownout conditions allowing you to work through brownouts
without unnecessary battery drain. |
| AVR Trim |
Automatically corrects
overvoltage conditions allowing you to work through
overvoltages without unnecessary battery drain. |
|
|
| CellGuard |
Improved reliability results
from a precision battery charging system, and automatic
true-load battery tests. Redundant overcharge protection
contributes to longer battery life. SmartBoost and SmartTrim
regulate under- and overvoltages without switching to battery.
|
|
|
| Advanced Battery Monitoring |
The product automatically
performs a self-test every two weeks. This ensures you will be
alerted to degraded batteries before they wear out. Through
software, or the push of a button, you may perform self-tests
anytime. |
|
|
| Faster Recharge Time |
The Smart-UPS battery
charging system is microprocessor controlled to precisely
charge batteries in less time than legacy UPS systems. This
makes your system available more quickly for subsequent power
disturbances. |
|
|
| QuickSwap |
The 60 second, user friendly,
hot-swappable battery replacement system saves the time and
expense of returning the UPS to the factory for battery
service, and allows safe and easy replacement of batteries
while your system is up and running. Replacement battery kits
ship in a reusable box for convenient return of exhausted
batteries to a recycling center or to APC. |
|
|
| Accessories |
By adding APC accessory cards
into the built-in SmartSlot, you can monitor power conditions
and take action. The addition of the accessory cards increases
overall system availability by proactively notifying you of
conditions that could affect uptime. |
|
|
|
Manageability
|
|
| Built-in SmartSlot |
These products are equipped
with a built-in SmartSlot allowing you to implement various
UPS Accessory cards to customize and enhance the management of
your Smart-UPS. Optional accessories allow you to remotely
reboot individual devices, monitor ambient temperature and
humidity and work with Emergency Power-Off (EPO) systems.
(SmartSlot option not available on SU420NET/SU620NET models)
|
|
|
| Status Indicator LED's |
Provides status at a glance
instantly assess the status of your power and the APC
Smart-UPS without even pushing a button. Bar meters and status
indicators are simple to use and easy to understand. Visible
and audible alarms alert you to fault conditions.
|
|
|
| Load Meter |
The Load Meter prevents you
from exceeding UPS capacity. The Volt Meter reports utility
line voltage and battery capacity, allowing you to gauge how
much time you have before batteries are depleted. An alarm
sounds when batteries are low, allowing you time to save data
and shutdown the system. The Load Meter and Volt Meter
features are not available on the SU420NET/620NET models.
|
|
|
| Alarms |
Audible alarms alert you to
changes in operating environment and battery conditions. Some
alarms are software configurable and most can also be
suppressed or delayed to eliminate nuisance alarms.
|
|
|
| Software |
PowerChute plus power
management software included. This software meets the demands
of high performance networks and enhances the reliability and
manageability of network and web servers. |
